4.4 C
Munich
Sunday, November 27, 2022

Why I Am Getting Red Light On My Linksys Velop?

Must read

Why I Am Getting Red Light On My Linksys Velop?

Does your Linksys Velop keep on showing red light? Need not worry! We have come up with this post. Here, we are going to share with you some tested and proven fixes to get rid of the issue from the comfort of your home.

Fix 1: Check the Power

First things first, check whether the power is being supplied to your Linksys Velop. Make sure that it is continuous and fluctuation-free. Apart from this, the wall socket in which your Velop device is plugged in must be well-working. Doing so will somehow fix the red light issue for you.

Check the Cable Connections

Loose or faulty cable connections can also let you experience the issue. So, what you have to do – check the Ethernet cable you have used to connect the Velop and your WiFi devices. Make sure that your devices are connected properly.

  • Access the Linksys Velop login page to check whether the connection between your Velop and your WiFi devices is successfully established or not.
  • Apart from this, you can also connect your devices using a wireless source. But, ensure to connect your Velop to your own WiFi only. If you connect your Velop to a free hotspot, you may also experience WiFi-signal interferences, resulting in no internet and red light issue.

Check the Compatibility

Before connecting your WiFi devices to the Velop, we suggest you check their compatibility. Ensure that the devices you are using are compatible with your Velop device.

Still, facing the same issue? Reboot Your Linksys Velop

Yes, you read it absolutely right! This tip works in most cases. Rebooting the Linksys Velop fix many big and small issue you are experiencing with your device. Wondering how to initiate the process? Not anymore! Power cycle or reboot your Linksys Velop by following the steps highlighted below:

  • Unplug your Linksys Velop from the wall outlet.
  • Wait for a few minutes.
  • Let your Velop take some rest.
  • Plug your Velop back in.
  • Wait for the power LED on the device become stable.
  • Connect your devices to the Linksys Velop.

Cross-check with your internet service provider! Chances are that the red light issue you are facing is because of your ISP end. So, what you have to do is to contact your service provider and ensure that everything is fine from his end.

Are you still getting the same issue? Well, in that case – you have no option left than to reset your Linksys Velop. Don’t worry! The reset process is not a daunting task!

Note: Before you reset Linksys Velop, it is important for you to be aware of the fact that the factory reset process wipes out all the personalized settings and data on your device, including username, password, security settings, etc. So, it is important for you to take the backup of all the Velop customized settings prior to resetting so that you won’t face issues while performing the Linksys wireless router setup process again.

To reset Velop back to factory default values, follow the instructions highlighted below in the exact given order:

Step 1: Disconnect all the devices that are connected to your Linksys Velop.

Step 2: Make sure that the power LED on your Velop is stable.

Step 3: Locate the reset hole on your Linksys Velop.

Step 4: Press the Velop reset hole using a pin or a paper clip.

Step 5: Hold the reset hole for some time.

Step 6: Release it.

Your Linksys Velop resets successfully. Now, you can initiate the Linksys wireless router setup process again and enjoy streaming the internet in every nook and cranny of your house.

In a Nutshell

Anticipating that all the hacks mentioned in this post have helped you out to deal with Linksys Velop red light issue? On the off chance that you are still unable to deal with the issue, feel free to drop your concerns into the comments section.

- Advertisement -spot_img

More articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Latest article