17.5 C
Munich
Tuesday, June 28, 2022

TP-Link Extender Not Connecting to Router? Let’s Fix!

Must read

TP-Link Extender Not Connecting to Router? Let’s Fix!

Performing TP-Link extender setup in your home is an excellent way to gain access to a lag-free and seamless internet connection. A WiFi extender transmits the signals of your existing router throughout your home. But, what if your TP-Link extender is not connecting to router? Well, that’s where we come into the picture.

In this post, we have summed up some of the topmost TP Link troubleshooting hacks that will surely help you rectify the TP-Link extender not connecting to router issue. Read on.

Fixed: TP-Link Extender Not Connecting to Router

Reboot Your TP-Link Extender

Start troubleshooting the TP-Link extender not connecting to router issue by rebooting your extender. Here is how you can do that:

  • Power off your wireless range extender.
  • Unplug it from its wall socket.
  • Wait for a couple of seconds.
  • Then, plug your wireless range extender back into the wall socket.
  • Press the Power button.

If required, also consider rebooting your TP-Link wireless router by following the same instructions mentioned above.

Verify the Ethernet Connection

There is a possibility that the Ethernet cable you have used to connect your TP-Link WiFi range extender to your home router is worn out or damaged from somewhere.

Therefore, either tape up the cable you are currently using or get it replaced with a new one. If none of these options work in your favor, consider connecting your devices with the help of a wireless source.

Bring Your WiFi Devices Closer

Apart from a poor connection between your TP-Link wireless range extender and the existing router, the distance between them might also be reason why you are struggling with the TP-Link extender not connecting to router issue. 

Thus, if you have place your extender far from the router, change its location right away. Make sure that both your wireless device are placed in close proximity.

Keep WiFi Interference at Bay

Another common reason why you are experiencing the TP-Link extender not connecting to router issue is because of WiFi interference.

To troubleshoot the issue, place your extender and the existing router away from:

  • Mirrors
  • Fish Tanks
  • Cordless Phones
  • Washing Machines
  • Baby Monitors
  • Refrigerators
  • Microwave Ovens
  • Treadmills
  • Televisions
  • Bluetooth Speaker
  • Metal Objects
  • Aluminum Studs
  • Corners
  • Concrete Walls

Now, try to connect your TP-Link wireless range extender to your home router and access http://tplinkrepeater.net . Are you able to? If not, continue reading this article.

Perform TP-Link Firmware Update

Performing TP-Link firmware update can also help you troubleshoot the extender not connecting to router issue. So, what are you waiting for? Update the firmware of your wireless device to the latest version right away.

What happened? Are you not sure about how to perform TP-Link firmware update? Well, no worries. You can refer to the guidelines given in the user manual. If you want to know anything else regarding your device, you’ll find everything in that little info book.

Reset And Reconfigure

Last, but not least, if you haven’t performed TP-Link extender setup properly, then also you can come across the issue you are currently facing. Therefore, make sure that you configure your device properly this time. 

But, before you do that, follow the instructions mentioned to reset your TP-Link extender:

  • Locate the Reset button on your wireless range extender.
  • Press it using an oil pin or any other pointed object.
  • Wait for a few seconds.

Once you are done resetting your device, you might be wondering how to setup tp link extender. Well, follow the steps mentioned below for the same:

  • Plug your TP-Link extender into a wall socket and power it up.
  • Connect the extender and router using a wired or wireless source.
  • Launch a web browser on your PC.
  • Log in to your wireless extender using the default login credentials.
  • On the Quick Setup wizard, follow the on-screen prompts.

And you are done! If this guide helped you fix the TP-Link extender not connecting to router issue, do let us know via the comment section.

- Advertisement -spot_img

More articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Latest article