19.4 C
Monday, July 4, 2022

How To Take Care Of Your 4WD Car?

Must read

How To Take Care Of Your 4WD Car?

Owning a 4WD car in Western Australia provides you with the ultimate accessibility to set out for lesser-known terrains and go for off-road adventures. And, for that, you need to keep your vehicle in optimal condition. There are various auto service stations that provide 4wd service in Perth to keep your vehicle always in a ready-to-go mode.

You also need to know the different ways by which you can properly take care of your 4WD. So, make sure you know them like the back of your hand.

    1. Check Fluid Levels and Battery

4WD vehicles are more dependent on transmission fluids than 2WDs. The fluids get overheated by frequent gear shifts, and in this way, its lubricating efficiency is lost much quickly. Insufficient fluid levels can lead to wearing out of the internal parts.

Ensure to regularly replace the transmission fluids once a month and ensure the car batteries are in perfect order. 

Also, before you set out for a long trip, remember to check your car has sufficient levels of engine oil, brake fluid, clutch fluid, power steering fluid, engine coolant, and windshield washer fluid.

    2. Keep The Tyres In Check

The amount of air in the tyres affects traction and wear. It is imperative to maintain the right amount of tyre pressure in your 4WD car tyres to keep them from wearing down quicker. The amount of tyre pressure required for driving through different terrains also varies. Your tyres will require different pressures driving over sand from what it will require on a corrugated gravel road.

Getting the tyre pressures right will improve your car’s fuel economy, wear and tear, and overall comfort as the tyres absorb a significant amount of vibration.

    3. Proper Alignment

Misalignment of your 4WD not only causes excessive tyre wear and tread degradation but also decreases the handling quality and mileage of the car. If you notice that your steering wheel pulls in one direction while driving, it is because of misalignment, and it may be because your tyres are at uneven pressure levels. Whatever the reason is, it is better to get your car inspected at car repair shops at the earliest.

    4. Prevent From Rusting

Rust is never good for the health of your car. Preventing rust on your 4WD is not a tough job to do. You can do an oil-type treatment on 4WD twice a year to keep it from rusting. It will keep your vehicle in proper condition while also maintaining its shine.

    5. Proper Servicing

Regular servicing and maintenance of your vehicle is not something that you are unaware of. But, the servicing schedule of a 4WD is not quite the same as that of other regular cars. You need to go through the manual when you buy a 4WD to know about its servicing needs.

For most 4WDs, the service interval is 10,000 – 15,000 km. But, when you are back from a long trip, it’s better to bring forward your next servicing date. Also, you must ensure that your vehicle is in the hands of a 4WD specialist, and they carry out the necessary tasks at regular intervals, as mentioned in the manual.

You can also learn some of the basics of repairing so that you can carry out the minor repairs and costs of hiring a mechanic.

    6. Be Mindful About The Mechanical Aspects

Even when you are driving your 4WD on rough terrains, you should still bear in mind to take proper care of it. Continuing to rash drive with your vehicle will not only reduce its lifespan but also affects the fuel economy and enhance the wear and damage.

You can drive with a little mechanical knowledge and mindfulness by being a little mindful and having some regard for your vehicle. It’s not that hard a thing to do, right?

    7. Keep Leaks In Check

The transfer case is an important part of 4WD that moves the power from the transmission to the car axles. The fluid in case of transfer can leak, suggesting that the other car components are not lubricated adequately. It will quickly wear down the internal mechanics of the car. Therefore, it is crucial to check the fluid levels in a transfer case to avoid damage to your vehicle.

    8. The Differentials

The differentials are the sets of gears using which the wheels operate at different speeds on a 4WD. These parts need to be lubricated and kept in order to maintain their effectiveness. Going on a journey without checking the oil and lubrication levels will put a strain on the differentials. They should also be checked for leaks or any discoloration from water contamination.


Keeping the above-mentioned tips in mind will ensure your 4WD’s proper working order. If you are a Perth resident, you will find numerous companies doing quality car inspection in Perth and surrounding suburbs. Take your vehicle into any of them you like and get it checked and serviced.

- Advertisement -spot_img

More articles


Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Latest article