Struggling badly with the netgear router red power light error problem on your router for a long time? Let’s get it fixed using successful mywifiext setup!
Have you tried various methods to fix the issue? Does nothing seem to be of any help? Walk through the tips given in this tutorial to fix the Netgear Nighthawk red light error.
Situations When You Get Red Light on Your Router
Mynetgear not working? Are you planning to reset Nighthawk router? Hold on! Before taking the plunge, get to know the various situations when your router can show red light error. Maybe you get the fix!
There are various LEDs on a router. Each led has different roles to perform. You need to first check Mynetgear router for which LED is showing red light and then try to fix the problem accordingly.
For instance, red light revealing on section related to broadband connectivity means there is an issue with your modem or connected cables. On the other hand, red light on the power LED can be due to a problem with the supply of power.
The same applies to other LEDs. If you see the red light on Service LED, this can be due to server authentication issues or power outage. If your modem showing a red light, it means your device is not able to find the DSL signal.
We hope now you would be able to know that each LED on a Netgear Nighthawk router signifies different meaning. So, you need to troubleshoot the red light issue keeping all these things in mind. A successful mywifiext setup will never let you face such issues in future.
Now, it’s time to give DIY tips a try.
Tips to Fix Red Light Error on Netgear Router
Update Your Nighthawk’s Firmware
Make sure your router is running the latest firmware version. If not, update the firmware of your Netgear Nighthawk router by navigating to the official site. You are advised to download the firmware as per the availability of your router’s model.
Consider Changing the Location
Chances are, your router is getting signal interference. It can be due to other WiFi devices, metal appliances, electronic devices, or reflexive surfaces at your home. To check if the red light error is location-related, simply change its location and remove physical obstructions nearby.
Check All the Wired Connections
The red light error can also occur if your devices like router, modem, or PC are not connected to their respective power outlets in a proper manner or are getting insufficient power supply.
Apart from that, if you have used an Ethernet cable to connect your modem and router, then the cable must not have any cuts or damage. If so, replace it with the new one. This may fix the issue you might be facing with your Nighthawk router.
If the problem is not related to the above-listed points and you still see a red LED light on your router, then better to reset and reconfigure your WiFi device by following the proper Netgear Nighthawk setup process.
Don’t know the setup process? Click here to know each and everything about the Netgear WiFi router setup.